Hach-Lange CDC401-30 Instruction Sheet - Manual

1
DOC302.53.00758
Instruction Sheet
CDC401-05, CDC401-10, CDC401-15, or CDC401-30 Probe
Safety
To ensure that the protection provided by this equipment is not impaired, do not use or install
this equipment in any manner other than that specified in this document.
Overview
Figure 1 shows the CDC401-05, CDC401-10, CDC401-15, or CDC401-30 Probe, which is
equipped with a bell-and-ring shroud. The probe can be equipped with a 5-, 10-, 15-, or
30-meter cable. The probe is designed for fast, accurate measurement of conductivity, salinity,
resistivity, or total dissolved solids (TDS) in wastewater, drinking water, and general
applications.
Each electrode is supplied with color-code clips for easy identification. There are two of each
five colors (black, yellow, light green, light blue, and magenta), one for the electrode and one
for the cable connector.
Optional probe-cable depth markers are available (Cat. No. 58286-10).
This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12
August of 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European
electrical equipment users must now return old or end-of life equipment to the Producer for disposal at no charge to
the user.
Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return
end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.
Figure 1 CDC401-05, CDC401-10, CDC401-15, or CDC401-30 Probe
1 Sensor Array, including Temperature Sensor and 4-pole
Conductivity Sensor 3 Color-coded Clip Locations
2 Bell-and-ring Shroud 4 5-, 10-, 15-, or 30-meter Cable