Hach-Lange REFO 60_REFO 60D - Manual (Page 23)

Operating Instructions REFO 60 / REFO 60-D
9
D3 Interface
REFO 60-D has a serial interface installed to send the displayed data to an
external device. Moreover, REFO 60-D is suitable for remote control with an
external device. The serial interface features:
Baud rate = 2400 Bit/s
Format of a transferred string:
1 start bit
8 data bits
1 parity bit
2 stop bits
Further information on the transfer is given in our detailed description of the
REFO 60-D interface which we will send you on request.
D4 Battery Operation
REFO 60 is powered by two batteries, type AA. The battery compartment is at
the back of the instrument.
Old batteries can be given to any battery collection centre for correct disposal.
D5 Fact Sheet
display digital, 4-digit dot matrix, LCD-display
measuring principle glossmeter following the single-beam principle acc.
to DIN 67530
calibration standard certifiable and retraceable DIN- or metal standard
viewing geometry 60°
dimensions 140 x 40 x 80mm L/W/H
measured area 17 x 9mm
power supply batteries, type alkaline LR6, AA Mignon
weight 430g