Spill recovery, Vertical mount – Hydrotech Classic Series Stenner Basic Service Manual User Manual
Page 20
19
BEST PRACTICE
Factory recommended
Mount pump vertically and use spill recovery to
run chemical back to tank in the event of tube
failure. Chemical drains back into solution tank,
preventing spillage on the ground/floor and keeps
chemical from collecting in tube housing.
Spill
Recovery
NOTE
Additional information
Screws are self-tapping; back off screws to find
original threads. If screw bosses are stripped, use
alternate bosses and position them opposite each
other. The pump housing must flex to avoid pump head
cracking. Do not use more than two screws.
Continued...
Vertical
Mount