Hydrotech SL844-12 Scaleless POE Residential System - Manual (Page 8)

Manual Bypass
(Figure 4A)
In the case of emergency, such as during service, you can isolate your
Scaleless System from the water supply using the bypass valve located on
the tank.
In normal operation the bypass is open with the on/off knobs in line with the
inlet and outlet pipes. To isolate the system, simply rotate the knobs clockwise
(as indicated by the word BYPASS and arrow) until they lock.
You can use your water related fixtures and appliances as the water supply is
bypassing the system. However, the water you use will be untreated.
To resume treated water service, open bypass valve by rotating the knobs
counter-clockwise.
Stainless Steel Bypass
(Figure 4B)
In normal operation the bypass lever is aligned with the inlet/outlet with the
pointer on SERVICE. To isolate the filter, rotate lever counter clockwise until it
stops and pointer indicates unit is in bypass.
You can use your water related fixtures and appliances as the water supply
is bypassing the filter. However, the water you use will be unfiltered.
To resume filtered water service, open the bypass valve by reversing the
rotation of the lever.
OUTLET
INLET
OUTLET
INLET
Figure 4B
Figure 4A
INLET
INLET
OUTLET
OUTLET



6