Hydra-Tech 6 HYDRA-GATE SLURRY MIXING VALVE User Manual
6" hydra - gate slurry mixing valve, Features, Specifications
6" HYDRA - GATE
SLURRY MIXING VALVE
z
z
z
z
z
Integral Flow Restrictor allows unit to be
connected to any open center hydraulic power
source
Specifications subject to change without notice.
z
z
z
z
z
Optional Quick-Change Tee Adapter kit
allows connection to any Hydra-Tech power
unit without modification
z
z
z
z
z
Removable Access Cover for easy clean-out
z
z
z
z
z
Full Flow Design allows unresricted flow
z
z
z
z
z
Can be used with centrifugal pumps
and electric sumbersibles with separate
hydraulic power source
z
z
z
z
z
Safe Hydraulic Power operation
z
z
z
z
z
Use with any hydraulic submersible
pump with flows to 1800 GPM
The Hydra- Gate slurry mixing valve is a
hydraulically operated diverter valve that
is used to redirect the pump discharge
flow back toward the area of the pump
inlet to promote mixing of solids into a
pumpable slurry. Once the solids are in
suspension the valve is shifted to allow
the mixture to be pumped to the desired
location.
FEATURES
A1008
WEIGHT:.............................................. 40 lbs. (18kg)
HEIGHT:......................................... 16-1/2" (420 mm)
WIDTH (Overall):............................ 11-1/4" (284 mm)
LENGTH (Overall):.................................. 18" (455 mm)
DISCHARGE PORTS:................................... 6" NPT
SOLIDS HANDLING:.................................. 5" (127mm)
HYDRAULIC HOSE PORTS:........... 3/8" (-6) SAE(F)
VALVE BODY:................................ ASTM A36 Steel
VALVE DISC:.................................................... Delrin
ELASTOMERS:.............................................. Buna N
HYDRAULIC OIL:..... Mineral or Vegetable based oils
INPUT FLOW:........................... Min. 1 GPM (4 LPM)
OPERATING PRESSURE:. Max. 3000 PSI (204 Bar)
POWER SOURCE:..
Any Open Center Hydraulic System
SPECIFICATIONS
167 Stock Street, Nesquehoning, PA USA
Phone: 570-645-3779 Fax: 570-645-4061
Website: www.hydra-tech.com
E-Mail: [email protected]
z
z
z
z
z
Attach directly to pump or place anywhere
in the discharge line