AT&T 2440 - Manual (Page 21)

Handset to Base and All Handsets
1 Press
I on the handset.
2 Press
* on the handset. All registered handsets and the base
will ring.
3 Respond at any handset or the base by pressing
I.
4 To end the intercom connection, press
O on the handset
— OR —
Press
I on the base.
Transfer Calls
You can transfer calls from base to handset, handset to handset, or handset
to base.
Blind Transfer
Transfer without advising the other person.
1 Press
I.
2 Enter the handset number (
1, 2, 3, 4) or 0 (base) where you
want to transfer the call.
3 The call is automatically transferred when the extension answers.
4 An unanswered transfer rings back to the sending handset or base
after 30 seconds.
Announced Transfer
Advise another person that you are transferring a call.
1 Press
H to put the call on hold.
2 Press
I.
3 Enter the number of the handset (
1, 2, 3, 4) or 0 (base) where
you are sending the call.
4 The responding handset or base presses
I to answer
your signal.
5 Both extensions press
O to end the intercom connection.
6 The responding handset or base presses
P or k
or
K to pick up the call.
INTERCOM/TRANSFER OPERATION
20