Grace Digital GDI-IRN1941 Victoria - Manual (Page 21)

21
7. Turn the knob until the correct time zone is seen on the display. Push the ‘Select’ button to set your
time zone. Then turn the Menu knob until the hour setting is correct, and then press the ‘Select’
button.
Set Time
1:30 PM
8. Turn the knob until the minute setting is correct, then press the ‘Select’ button.
Set Time
1:34 PM
The display shows with the new time shown beneath for 3 seconds, then returns to the
menu, press the ‘Back’ button 2 times to go to the main menu.
Setting the alarm
1. Press the ‘Select’ button.
NOTE: IF you make a mistake at any point, press the BACK button to go back to the previous screen
2. Turn the knob until the display shows
Stations
< Alarm Clock >
Media Player
3. Press the ‘Select’ button.
4. Turn the knob until the display shows