Grace Digital GDI-T2USB Tape2USB - Manual (Page 4)

3
20. Record to [REC INPUT] Connection
21. Play to [PLAY OUTPUT] Connection
Basic Operation
1. Connect the DC adapter to the power outlet and plug the other end to the DC jack connection on
the back of the unit.
NOTE: Before plug the DC jack on the back of the unit; please make sure the “POWER” button is shut
off.
2. Press the POWER button to turn the unit on.
Cassette Tape Use
Tape Handling:
Do not store tapes in the following places:
1. On top of heaters, exposed to direct sunlight or in any other places with high temperatures.
2. Near speakers, on TV sets or amplifiers or where the unit may be exposed to strong magnetic
fields.
3. Where humidity is high and in dirty, dusty places.
4. Avoid dropping or subjecting cassettes to excessive shocks.
5. Avoid use of C-120 tapes as these types of tapes are physically weak and could become
entangled in the transport mechanism.
Loading a Cassette Tape:
1. Use your finger or a pencil to turn the
cassette hub and take up any slack in the tape.
Note: Avoid touching the tape.
Fingerprints attract dust and dirt.
2. Press the STOP/EJ button to
open the cassette door.
Note: The cassette holder cannot be
opened during recording or playback.
3. Load the cassette tape with its open edge facing down.
4. Gently close the cassette compartment door.
MAINTENANCE:
The heads and tape path should be cleaned and demagnetized periodically (Cleaning materials not
included).
Cleaning Tape Path:
Apply head cleaning fluid to a cotton swab or soft cloth, and lightly rub the heads, capstan and all