Grace Digital GDI-TW4CD Tunewriter IV - Manual (Page 10)

OPERATION OPERATION
CD OPERATION
1 Press the CD(
7/40
) button to set
the unit to CD mode.
2 Press the CD OPEN/CLOSE
(19/39)
button to open the CD drawer.
3 Place your disc in the drawer with
the printed label side facing up.
4 Press the CD OPEN/CLOSE
(19/39)
button once more to close the
drawer. The disc will spin for a few
seconds while the player reads the
disc , then the disc stops and the
display shows the total number of
tracks on the disc.
5 Press the CD PLAY/PAUSE
(17/53)
button to begin playback on track
number one . The Play Indicator lights.
6 Adjust the VOLUME
(2/48)
control to
the desired level.
7 Playback will continue until the
end of the dicc. When the disc ends
the display again shows the total
number of tracks on the disc. You
may also stop playback at any time
by pressing the CD STOP
(18/55) button .
CASSETTE OPERATION
PLAYING CASSETTE
1 Press the TAPE(
5/43
) button to set
the unit to tape mode.
Note : Before inserting a tape in the
player be sure that there is no excess
slack in the cassette that could
jammed in the mechanism.
2 Insert your cassette into the
slot, as shown in the illustration,
with the side you wish to play
facing ' up' and the open end on
the right sde.
3 Cassette playback begins as
soon as the tape is inserted. Adjust
the VOLUME
(2/48)
control to the
desired level.
4 To advance the tape rapidly
depress the EJ/ FF
(26)
(Eject/Fast
Forward) button approximately half
way. The tape will move forward
rapidly as long as the button is
depressed. Normal playback will
resume when the button is released.
5 When the tape ends the player
stops
automatically. Depress the
E J / F F
( 2 6 )
( E j e c t / F a s t F o r w a r d )
button completely to remove the
cassette from the player. You may
press theEJ/ FF
(26)
( Eject/ Fast
Forward) button to stop playback
and remove the cassette at any
OPERATION INSTRUCTIONS
9