Specifications, Options – GeoVision AS810 Controller User Manual
Page 2
GV-AS810
January 10, 2014
-2-
SPECIFICATIONS
System Requirements
GV‐ASManager Version
GV‐ASManager V4.0 or later
Hardware
CPU
32‐bit ARM7TDMI
Number of User Cards
40,000 cards
Event Buffer
1,000,000 events and log data
Power
AC 100~250 V , 50~60Hz
Reader Port
8 Wiegand interfaces
1 RS‐485 interface only for GV‐Readers and GV‐GF Fingerprint Readers (max. 8 GV‐Readers)
26~64 Bit format
Wiegand Interface
12V DC power supply, 200mA
Communication
TCP/IP
Input
16 inputs, dry contact, NO/NC
Output
24 relay outputs
Operating Temperature
0 ~ 65 °C / 32 ~ 149 °F
Operating Humidity
10% ~ 90% RH (non‐condensing)
Dimension (W x H x T)
210 x 187 x 40 mm / 8.27 x 7.36 x 1.57 in
Weight
900 g / 2 lb
Certification
CE, FCC, RoHS
Note: Specifications are subject to change without notice.
Options
Optional devices can expand the capabilities and versatilities of your GV‐AS Controllers. Consult your sales representative for more
information.
GV‐Reader 1251 is a card reader that uses a 125 kHz frequency. It has both Wiegand and RS‐485 outputs that can be
connected to any standard access control panel.
GV‐Reader 1352 V2 is a card reader that uses a 13.56 MHz frequency. It has both Wiegand and RS‐485 outputs that can
be connected to any standard access control panel.
GV‐RK1352 is a card reader with keypad that uses a 13.56 MHz frequency. The reader has both Wiegand and
RS‐485 outputs that can be connected to any standard access control panel.
GV‐R1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS‐485
outputs that can be connected to any standard access control panel.
GV‐DFR1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS‐485
outputs that can be connected to any standard access control panel.
The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In
Fingerprint Only mode, the fingerprints are enrolled through GV‐ASManager. In Fingerprint + Card mode, the
fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card
to be granted access. Readers with optical and capacitance sensors are available.
GV‐CR420 is a card reader with a built‐in 4MP wide angle IP camera. The card reader recognizes identification
cards and transmits live view through network connection.
Cabinet
Only available for 400 / 810. With the cabinet, GV‐AS Controllers can be mounted directly to a wall or
recessed into the wall.
Two types of cabinet dimensions are available (W x H x D):
• 383.5 x 443.5 x 112.2 mm / 15.1 x 17.5 x 4.4 in
• 300 x 420 x 86 mm / 11.8 x 16.5 x 3.4 in
The push button switch can be integrated with access control system, allowing door exit by momentarily
activating or deactivating the electric locking device. Both American standard and European standard push
buttons are available.
The GV‐IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open
the door with a wave of hand.
Three types of electric locks are available: electromagnetic lock, electric bolt and electric strike.
GV‐AS ID Cards and GV‐AS ID Tags are ideal for business and residential environment, where access control is
important for security reasons. 125 kHz and 13.56 MHz cards and tags are available.