GeoVision GF1922 User Manual

Page 2

Text mode
Original mode

GV-GF1921/GF1922

February 27, 2014

Note:

1. For data synchronization with GV‐ASController and GV‐ASManager through the Ethernet, it only supports the following

controller firmware version and software version:
* GV‐ASManager: V4.0 or later
* GV‐AS210 / 410 / 810: V1.1 or earlier

2. GV‐GF1921 / 1922 do not support third‐party controllers.
3. All specifications are subject to change without prior notice.

Options

GV‐AS ID Card & GV‐AS ID Tag

For Card + Fingerprint Mode, the GV‐AS ID F Card or GV‐AS ID F Tag is required. For Card Only
Mode, both the GV‐AS ID F Card / Tag and the GV‐AS ID Card / Tag are supported.

Packing List

 Fingerprint reader
 Data Cable (of 30 cm / 0.98 feet)
 Manager Enroll Card
 Manager Delete Card
 Mounting Plate
 Standard Screw x 2
 Plastic Screw Anchor x 2
 Security Screw
 Torx Wrench
 Connector Wire
 Software CD

This manual is related to the following products:

GF1921