BJM Pumps XP-SK150C-575T - Manual (Page 8)

8
Two ways to check the correct pump rotation:
1. By looking at the impeller; the rotation of the impeller should be counter
clockwise as shown in the picture below.
2. By looking from the top of the pump. Since the impeller cannot be seen, the best
way to check the rotation is to check the kick back motion of the pump when the
pump just starts. The kick back motion of the pump should be counter clockwise
as shown in the picture below.
PUMP OPERATION
This pump is designed to handle dirty water that contains some
solids. Do not attempt to pump any liquids which may damage the pump or endanger
personnel as a result of pump failure.