Introduction – BJM Pumps XP-SK150C-575T User Manual
Page 4
4
INTRODUCTION
This Installation, Operation and Maintenance manual located in the front half of this
manual only covers the pump end (wet end) of the XP-SK Series pumps.
Refer to EIM ELECTRIC CO., LTD Instruction Manual located in the second half of this
manual for Installation, Operation and Maintenance for the Explosion Proof Submersible
Motors (EMQY Series; FM Approved for Class I, Division 1, Group C & D).
This manual provides important information on safety and the proper inspection;
disassembly, assembly and testing of the BJM Pumps® SK Series Wet End attached to
EIM Electric Co., LTD. EMQY Series Explosion Proof Submersible Motors. This manual
also contains information to optimize performance and longevity of your BJM Pumps
submersible pump end.
The submersible XP-SK Series pumps are designed to pump water with some
solids. The pump and motor housing are made of cast iron (the impeller and
suction are made of chrome iron in pumps with 2, 3 & 5 HP motors). Consult
chemical resistance chart for compatibility between pump materials and liquid
before operating pump.
If you have any questions regarding the inspection, disassembly, and assembly or
testing please contact your BJM Pumps distributor, or BJM Pumps, LLC.
Note: All service work on the FM Approved motor by EIM Electric Co., needs to be done
by an FM Approved repair facility.
BJM Pumps, LLC
Phone: 877-256-7867
123 Spencer Plain Rd.
Phone: 860-399-5937
Old Saybrook, CT 06475, USA
Fax: 860-399-7784
Information, including pump data sheets and performance curves, is also available on
our web site
For assistance with your electric power source, please contact a certified electrician.
Please pay attention to the following alert notifications. They are used to notify
operators and maintenance personnel to pay special attention to procedures, to avoid
causing damage to the equipment, and to avoid situations that could be dangerous to
personnel.
Immediate hazards that WILL result in severe personal injury or
death. These instructions describe the procedure required and the injury which will
result from failure to follow the procedure.
- XP-SK150C-460T XP-SK110C-575T XP-SK110C-460T XP-SK110C-230T XP-SK75C-575T XP-SK75C-460T XP-SK75C-230T XP-SK55C-575T XP-SK55C-460T XP-SK55C-230T XP-SK55C-208T XP-SK37C-575T XP-SK37C-460T XP-SK37C-230T XP-SK37C-208T XP-SK22C-575T XP-SK22C-460T XP-SK22C-230T XP-SK22C-208T XP-SK15C-575T XP-SK15C-460T XP-SK15C-230T XP-SK15C-208T