Atlantis Land I-Fly 899 A02-WR-54G ME01 - Manual (Page 29)

25
Note: As soon as 802.1X security is enabled, all the wireless client stations that are connected to the
Router currently will be disconnected. The wireless clients must be configured manually to
authenticate themselves with the Radius server to be reconnected.
3.8.3 STATUS
This selection enables you to view the status of the router LAN, WAN connections, and view logs and
statistics pertaining to connections and packet transfers.
3.8.3.1 Device Information
This screen enables you to view the router LAN, Wireless and WAN configuration.
Firmware Version: Displays the latest build of the router firmware interface. After updating the
firmware in Tools - Firmware, check this to ensure that your firmware was successfully updated.
LAN: This field displays the router's LAN interface MAC address, IP address, subnet mask, and
DHCP server status. Click DHCP Table to view a list of client stations currently connected to the
router LAN interface.
Wireless: Displays the router's wireless connection information, including the router's wireless
interface MAC address, the connection status, the SSID status, which channel is being used, and
whether WEP is enabled or not.
WAN: This field displays the router's WAN interface MAC address, DHCP client status, IP address,
subnet mask, default gateway, and DNS.
Click DHCP Release to release all IP addresses assigned to client stations connected to the WAN via
the router. Click DHCP Renew to reassign IP addresses to client stations connected to the WAN.