beautypg.com

Biamp VAM-1 User Manual

Page 7

background image

7

VOCIA AUXILIARY MICROPHONE 1 (VAM-1)

LED Indicators when used with VI-6
The VAM-1 has two bi-colour status LEDs visible when the microphone is lifted from the cradle. When connected to a VI-6 the following
LED indications are supported:

If the VAM-1 is indicating it is in an idle state a Page may be initiated by pressing the PTT switch. After the switch is pressed, the Wait and
Talk LED indicators will illuminate as follows:

•  Wait LED Indicator: The LED will illuminate amber while the Paging Station or VI-6 is configuring the Page and/or playing a Preamble.
•  Talk LED Indicator: The LED will illuminate green to indicate an anouncement is ready to be accepted.

Installation
The VAM-1 is suitable for surface mounting vertically on a wall or desk in portrait orientation. Note that the VAM-1 connector protrudes
into the mounting surface behind the unit. In addition, adequate space must be allowed behind the VAM-1 for accommodation of a mating
connector and cable.

VAM-1 Status

Busy LED

Talk LED

Idle

Green Pulse

Green Pulse

Page Setup in Progress

Amber

Off

Destination Zones In Use

Red Flash

Red Flash

Please Talk Now

Off

Green

Approaching End of Maximum Page Length

Off

Green Slow Flash

Maximum Page Length Exceeded

Red Flash

Red Flash

Message Playback Request Queued

Off

Green Flash

Message Playback Request Failed

Red Flash

Red Flash