Biamp VAM-1 - Manual (Page 6)

6
VOCIA AUXILIARY MICROPHONE 1 (VAM-1)
LED Indicators when used with Paging Station
The VAM-1 has two bi-colour status LEDs visible when the microphone is lifted from the cradle. When connected to a Paging Station the
following LED indications are supported:
Using the VAM-1 with a Vocia Input 6 (VI-6)
The VAM-1 is designed to connect to the VI-6 Paging Port Inputs. When the VI-6 audio input path is configured to use the VAM-1 the
associated line inputs of the VI-6 will be unavailable for use. One VAM-1 is able to be connected to each Paging Port Input with a total of four
able to be connected to a single VI-6. The Audio Channel Signal Presence LEDs on the front of the VI-6 chassis will continue to operate when
the input channel is configured for Paging. The LEDs will function regardless of whether an associated VAM-1’s PTT is pressed.
Live Page Preambles are supported but must be assigned to the VI-6 acting as a host via the Vocia software.
Each Paging Input can be configured in the Vocia software with their own dedicated Page Code. For microphones connected to a VI-6,
Store-and-Forward and PIN Code functionality are not supported.
VAM-1 Status Busy LED Talk LED Paging Station LCD Message
Idle Green Pulse Green Pulse Current page Code
Paging Station In Use Red Flash Red Flash Current page Code
Paging Station PIN Locked Red Flash Red Flash Station Is Locked
Page Setup in Progress Amber Off Aux. Mic. In Use
Destination Zones In Use Red Flash Red Flash Aux. Mic. In Use
Please Talk Now Off Green Aux. Mic. In Use
Approaching End of Maximum Page Length Off Green Slow Flash Aux. Mic. In Use
Maximum Page Length Exceeded Red Flash Red Flash Aux. Mic. In Use
Message Playback Request Queued Off Green Flash Aux. Mic. In Use
Message Playback Request Failed Red Flash Red Flash Aux. Mic. In Use