Biamp A4 - Manual (Page 85)

Using Control Surfaces
Using Control Surfaces
Typically, there will be one or more dedicated computers connected to the network , with daVinci
software running, and user access to the control surface available via Login/Logout . Dedicated
Login/Logout controls may also be available on the control surface. Login requires a User Name
and Password, as established under
User Accounts .
If the control surface in unavailable (daVinci software and/or computer shut down), then the user
may need to
Connect To Network and Open Control Surfaces. NOTE: This approach may
bypass some 'user mode' settings established by the Administrator.
83