Flowline AVX6 Float-Point - Manual (Page 9)

22 AUG 08 Switch-Tek Float Series 9 of 14
Rev A MN801839
Dimensions (continued)
LH29-1001 AV16-S243, AV26-S243,
AV36-S243, AV46-S243
and AV56-S243
AV26-S243 Shown
Material Compatibility:
o
The LV36-S201, LV36-S401, LV35-S201, LV35-S401, LH35-S201 and LV36-S501 are
made of 316 stainless steel (316 SS) with 22 AWG, Teflon 24” wire.
o The LH25-1201, LH25-2401, LV21-1101, LV21-1201 and LV20-1501 are made of
Polypropylene (PP) with 22 AWG, Teflon 24” wire.
o The LV20-2101 and LV20-2201 are made of Polytetrafluoroethylene (PTFE) with 22
AWG, Teflon 24” wire.
o The LH29-1001 is made of Polypropylene (PP) with a Valox 420 stem and 22 AWG,
HALAR jacketed 120” wire.
o The AV16-S243, AV26-S243, AV36-S243, AV46-S243 and AV56-S243 are made of
316 Stainless Steel (316 SS) with a Polypropylene (PP) enclosure.
o Make sure that the switch is compatible with the application liquids. To determine the
chemical compatibility between the sensor and its application liquids, refer to the
Compass Corrosion Guide, available from Compass Publications (858-589-9636).