Flowline AX1X Switch-Pak - Manual (Page 2)

Step One
SPECIFICATIONS
2.5"
(64mm)
3.6"
(92mm)
2.8"
(71mm)
2" NPT (1-1/2" G)
A (Specify)
Specifications:
Length: 6" to 10' (15 cm to 3m)
Switch point: 1 (set by factory)
Orientation: ± 30˚ vertical
Process temp.: F: -40˚ to 194˚
C: -40˚ to 90˚
Pressure: AU1_: 150 psi (10 bar)
AZ1_: 150 psi (10 bar)
AV1_: 25 psi (1.7 bar)
Wetted material: 424_: PP
524_: PVDF Kynar®
Process mount: _243: 2" NPT
_247: 1 1/2" G
Enclosure rating: NEMA 4X (IP65)
Installed height: 3.6" (9.1 cm) above tank process mount
Encl. material: PP, UL94VO
Conduit entrance: Single, 1/2" NPT
Termination:
2-4 poles
CE compliance: EN 50082-2 immunity
EN 55011 emission
EN 61010-1 safety
Sensor Technologies:
Ultrasonic (LU10 series)
Broadly applied in chemical, solvent, hydrocarbon and
light weight oil media
Supply voltage:
12-36 VDC
Consumption: 25 mA maximum
Contact type: (1) SPST relay
Contact rating: GP: 120 VAC/VDC @ 1A
IS: 32 VDC @ 0.5A
Contact output: Selectable NO/NC
Classification: Intrinsically safe
Buoyancy (LV10 series)
Best applied in clean water or water-like chemical
media that is non-coating or scaling
Contact type:
(1) SPDT reed
Contact rating: 120 VAC/VDC @ 15 VA
Contact output: Selectable NO/NC
Classification: General purpose
Vibration (LZ10 series)
Typically applied in wastewater media with light coat-
ing and/or foaming characteristics
Supply voltage:
12-36 VDC
Consumption: 25 mA maximum
Contact type: (1) SPST relay
Contact rating: 120 VAC/VDC @ 1A
Contact output: Selectable NO/NC
Classification: General purpose