Flowline DX10 EchoPod User Manual

Page 6

We do Your Level Best

Finalize Settings

The options on the right of the WebCal screen to finalize the
configuration.

The Advanced button is used for options available when setting up the sensor with
special, non-standard features. Many of these features are available for specific
applications that may change from time to time. Consult WebCal's HELP file for the
latest information on the use of any of these features.

The more commonly used Advanced features are the Invert Relay and Increase
Output Filtering described below.

Before configuration can be completed:

You must click the Write to Unit button to save the settings to the unit.

Then, click Wiring Diagram

for a hard copy of the EchoPod’s settings.

Finally, enter the file name under which you wish to save the configuration
file and click Save Config File.

Configuration is now complete.

Disconnect the USB Fob before continuing to the next step: Mounting the EchoPod

For updates to WebCal

, or to make sure you’re using the most up-to-date version

available, click the Update tab on the top of the WebCal screen.



Write to Unit. Send your configuration into
EchoPod



Wiring Diagram. Open PDF wiring
schematic of your configuration.



Advanced. Configure advanced settings.
Read the section below on advanced setting
options



Factory Config. Return EchoPod

to the

original factory configuration.



Clear Screen. Clears the screen of
configuration settings.



Config File. Name, save, open or print your
configuration for later use

Advanced Settings



Increase Output Filtering. Select
this radio button to add additional
filtering.



Decrease Output Filtering.
Select this radio button to remove
all output filtering.