Abocom WB2000 - Manual (Page 16)

- 14 -
Preamble A preamble is a signal used in wireless
environment to synchronize the
transmitting timing including
Synchronization and Start frame
delimiter. (Note: Please check the
setting of AP first.)
~ Auto Select Auto for the Network adapter
to select the Preamble type
automatically depending on the
Access Point Preamble type.
~ Long
Preamble
If in a "noisy" network environment,
the Preamble Type should be set to
Long Preamble.
~ Short
Preamble
The Short Preamble is intended for
applications where minimum overhead
and maximum performance is desired.
If in a "noisy" network environment,
the performance would be decreased.
RTS
Threshold
This value should remain at its default
setting of 2347. Should you
encounter inconsistent data flow, only
minor modifications of this value are
recommended.
Select Shared
key Index
Select from 1 , 2, 3, 4 or No selection.
Sharekey1
Sharekey2
Sharekey3
Sharekey4
This setting is the configuration key
used in accessing the wireless network
via WEP encryption.
Fill in the appropriate value/phrase.
SSID SSID is the unique name shared
among all points in your wireless
network. It must be identical for all
points in the network. It is
case-sensitive and must not exceed 32
characters. Make sure that all points
in the network are set the same.
WEP WEP is a data privacy mechanism
based on a 64 Bit/128 Bit shared key
algorithm.
Select WEP key 128bit or WEP key
64bit to enable WEP encryption.