Autostart AS-6070 TW - Manual (Page 8)

Safe Start Mode
FUNCTION BY PRESSING ICON BUZZER
INSTRUCTIONS /
DESCRIPTION
START ON SAFE
START MODE
X 2
+
Melody
Press the button twice within
3 seconds. Or:
Press for 1 second (melody) then
press again for 1 second.
STOP ON SAFE
START MODE
None Melody
*Runtime Options (once the car has been remote started)
FUNCTION BY PRESSING ICON GAS DIESEL
4 minutes 9 minutes
ENGINE RUNTIME 15 minutes 20 minutes
25 minutes 30 minutes
LCD Transmitter Operation (Second Car Control)
Basic Vehicle Operation
FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION
LOCK + 1 Beep
Locks the doors
and arms the Starter Kill (if
installed) and the alarm.
UNLOCK + 2 Beep
Unlocks the doors and disarms
the Starter Kill (if installed) and
the alarm.
START +
+
Melody Starts the engine
STOP + None Melody Stops the engine
Start and Stop While in Safe Start Mode
FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION
START ON SAFE
START MODE
+ X 2
+
Melody
Press the and buttons
simultaneously twice within
3 seconds.
Press for 1 second (a melody
will be heard) then press 1sec
and a melody will be heard
again.
STOP ON SAFE
START MODE
+ None Melody
Remote-Starting Your Vehicle
Setting Your Vehicle Into Ready Mode
This product is designed for vehicles with a manual transmission only. In order to start the vehicle
by remote, the unit must first be set to Ready Mode. If the unit is not set to Ready Mode, it cannot
remote-start the vehicle.
Once the system is set to Ready Mode, the vehicle can be remote-started and stopped at wish.
The system will exit Ready Mode if a door or the hood is opened, if the brake pedal is pressed, if
the parking brake is disengaged or if the ignition key is turned to the
IGNITION ON (RUN) position.
P. 8 User Guide AS-6070 TW