AT&T 1460 - Manual (Page 48)

4 5
TELEPHONE OPERATION
PROBLEM SOLUTION
If the system does not • Make sure that the answering system is
answer after the correct on.
number of rings:
• If Toll Saver is on,the number of rings
changes to two when you have new
messages waiting.
• In some cases,the system may be
affected by the ringing system used by
the local telephone company.
• If the memory is full or the system is off,
the system answers after 10 rings.
PROBLEM SOLUTION
If CL appears in the You need to reset the clock.
Messages Window:
PROBLEM SOLUTION
If the system does not • Make sure you are calling from a touch
respond to commands tone phone. When you dial a number,
from a remote touch you should hear tones. If you hear clicks
tone phone:
instead,the phone is not a touch tone
telephone.
• Make sure you enter your Remote Access
Code correctly.
• There may be noise or interference on
the phone line you are using. Press keys
firmly.
PROBLEM SOLUTION
If your outgoing • When you record your announcement,
announcement isn’t make sure you speak in a normal tone of
clear: voice, about nine inches from the base.
• Make sure there is no “background”noise
(TV, music,etc.) while you are recording.
91-5387-30-00_ATT1460_R1 2003.3.27 10:21 AM Page 45