Simply Automated UPP - Manual (Page 6)

Pocket Programmer Model UPP
6
Select Net ID=001
Select Net ID=001
Select Pswd=0000
1 )Access Network
2)New Network
1
1 )Add Device
2)Edit Device
1
Select Net ID=002 To desired
Network ID
Select Net ID=001
Select Pswd=1000 Select Net ID=001
Select Pswd=1000
Continue until
desired
Password
to Add Device (See Add Device page)
to scroll through this sub-menu (See Access Network Sub-Menu)
New Network
Select Net ID=001
1)Access Network
2)New Network
2
New Network is used to create a UPB network by starting with a Network ID and
Password. The Network ID can be from 1 – 250. It is recommended to use a
different Network ID for each installation. The password is 4 hexidecimal
characters, 0 – 9 and A – F. Once the UPB network is created devices and Links
may be added. Nothing is stored in the UPP. All data is stored in the devices as
they are added. UPB device must share the same UPB Network ID and password
to communicate peer to peer.