AGFA ePhoto CL20 - Manual (Page 28)

Chapter 5: Ordering Prints Over the Internet Using AGFAnet Print Service 28
Ordering Prints Using the AgfaCam Mounter
1 Install the software as described in Installing the Required Software .
2 Connect the ePhoto CL20 with the USB cable to your computer as described in Connecting the
Camera to Your PC .
3 Repeat the procedure described in Viewing and Saving Images on Your PC Using the
AgfaCam Mounter .
4 Select the thumbnails you want to transfer to AGFAnet Prints.
5 Drag the desired images onto the AGFAnet Print application icon.
The AGFAnet Print application starts.