AGFA ePhoto CL20 - Manual (Page 20)

Chapter 2: Recording a Still Image 20
Chapter 2: Recording a Still Image
# Note: Do not forget to insert batteries as described in Inserting Batteries.
1 Slide the REC/OFF auto return switch towards REC.
Wait until the Green Action Indicator stops blinking.
2 Change the camera settings.
3 Frame the image in the viewfinder.
4 Press the Shutter button and hold still your camera until you hear a beep.
The action indicator blinks until the image is stored in the camera’s (or external) memory.
The moment the action indicator stops blinking you can record another image.
# Note: The camera shuts down after one minute when no button is pressed.
Tips to Record Images
! The number on the display indicates the number of images that still can be recorded.
! While recording an image, hold still your camera until you hear a beep.
! To obtain sharp images, do not record images closer than 65 cm (25.6“).
! Be aware that the built-in flash only ranges from 1 m to 3 m (3.3 ft to 9.8 ft).
! Preset your camera to High or PhotoGenie resolution if you intend to print the image.
! Preset your camera to Low resolution if you intend to use the image in internet or e-mail
applications.