beautypg.com

Speaker set-up to operate – AmpliVox SW662 User Manual

Page 5

background image

5

SPEAKER SET-UP

To Operate:


Insure that both speakers are plugged into the “LEFT / RIGHT SPEAKER” jacks . If using a wired handheld microphone, plug it into
the “DYNAMIC” jack. Turn amplifier on. Turn microphone on and talk into microphone. Rotate “VOLUME” control knob to obtain de-
sired loudness level.

If using the wireless microphone; the wireless receiver has a separate “ON-OFF” switch and is located just below main power switch
of amplifier. Slide to “ON” position. Insure both transmitter and receiver are on the same frequency channel. On the S1690T wireless
transmitter, move the power switch to “ON”. RF LED on side of amplifier will light, meaning that it is receiving signal. If RF LED does
not light, check channel numbers.

Speaker Connection (as shown above)

Use one “Y” connector and plug into the two wires coming from the speakers. Do for both set of speakers. Now take a 40 Ft. speak-
er cable and plug one end into the “Y” adapter and the other end into the “LEFT / Right” speaker jack on front panel.

S1690T WIRELESS MICROPHONE TRANSMITTER:

Rotate the Channel Selector Switch (B) on the wireless microphone transmitter to the same channel selected on receiver (

A

).

Belt clip on the back of the unit clips the transmitter onto a belt or the transmitter simply can be put into a pocket. Plug the lapel / head-
set microphone into the Mic Input Jack (C). The lapel microphone can be clipped to a necktie or other clothing, using the supplied
clip. The lapel mic should be placed under the chin, as close to the center of the body as possible. Slide the power ON/OFF switch

(D)

to the ON position (the LED indicator light will illuminate). If you are on the same channel numbers, the LED light on the side pan-

el

(A) of the amplifier will light.

SW805A INTERNAL WIRELESS MICROPHONE RECEIVER:

Select channel (1-16) on panel (A). Channel number should match
channel number on wireless microphone transmitter. Use supplied
screwdriver to select channel number.

Channel Selector

Top Panel

S1690T Microphone

Transmitter

B

C

D

A

B

This manual is related to the following products: