SoundMax SM-DVD5109 - Manual (Page 9)

9
Button functions
POWER
When playing, press POWER button on the panel or on the RC to turn off the unit, and standby mode will be activated;
Press the button again, to turn on the unit and it will start playing.
DIRECT PLAY
If a DVD disc contains a warning or notice message or an advertisement clip, press this button to skip them and go directly
to the disc contents.
OPEN/CLOSE
Press OPEN/CLOSE button on the RC or OPEN button on the panel when power is on, the disc tray is pushed out. Put the
disc on the tray with the title faced up. Press the button again to close the disc tray and the unit starts playing
automatically.
Number buttons
Press number buttons to input digits and numbers (e.g. track/chapter number, playback time etc.).
TIME
Press TIME button to input chapter/title number or disc time. Playback will start in accordance with the input data.
DISPLAY
Press DISPLAY button to display various info on the current playback: title/chapter time elapsed/remaining, etc.
ZOOM
When playing DVD, SVCD, VCD disc, press ZOOM button to zoom in the picture as follows: 2x => 3x => 4x => normal. In
zoom in mode, press cursor buttons to move the picture for viewing.
A - B
Press A-B button at the start point (A) and the ending point (B) to select the repeat fragment.
Press A-B button the third time to cancel fragment repeat and return to normal play.
REPEAT
Press REPEAT button to repeat a title, chapter, track or the whole disc.
When playing DVD disc, press REPEAT button continually to repeat chapter => title => all => repeat off.
When playing SVCD, VCD, CD disc, press REPEAT button continually to repeat track => all => repeat off.