Asus P5G41TD-M PRO - Manual (Page 50)

2-12 Chapter 2: BIOS information
2.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press to display the sub-menu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above the total
physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
Allows you to select the amout of system memory used by the Interanal graphics device.
Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 48MB] [Enabled, 64MB]
[Enabled, 128MB] [Enabled, 256MB]
The following item appears only when you installed an Intel ® Pentium ® 4 or later CPU that
supports the Enhanced Intel SpeedStep ® Technology (EIST).
Intel(R) SpeedStep(TM) Tech [Enabled]
Allows you to use the Enhanced Intel ® SpeedStep ® Technology. When set to [Enabled], you
can adjust the system power settings in the operating system to use the EIST feature. Set this
item to [Disabled] if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
Intel(R) Virtualization Tech [Enabled]
Enables or disables Intel ® Virtualization Technology. Virtualization enhanced by Intel ®
Virtualization Technology allows a platform to run multiple operating systems and applications
in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. Configuration options: [Enabled] [Disabled]
CPU TM function [Enabled]
Enables or disables Intel ® CPU Thermal Monitor (TM) function, a CPU overheating protection
function. When enabled, the CPU core frequency and voltage are reduced when the CPU
overheats. Configuration options: [Disabled] [Enabled]
Execute-Disable Bit Capability [Enabled]
Allows you to enable or disable the No-Execution Page Protection Technology. Setting this
item to [Disabled] forces the XD feature flag to always return to zero (0).
Configuration options: [Disabled] [Enabled]