CHIEF MSTU - Manual (Page 9)

Installation Instructions MSTU
9
Cable Management
NOTE: For attaching and adjusting cables, the MSTU mount
features a kickstand to allow access without having to
remove display from the wall.
1. Ensure kickstand is firmly in down position.
2. Attach or adjust cables as necessary on back of display.
3. To disengage kickstand, slightly pull display away from wall
and pull down on cable management straps to release
kickstand. Slowly allow display to return to the wall. (See
Figure 7)
Figure 7
NOTE: Due to the low-profile design of the Thinstall Series,
displays with cable connections coming straight out of
the back may require 90-degree cable connectors.
Chief offers in-wall accessories that can assist with
recessing cables and connections.
NOTE: Certain displays may have limited space available for
cable management.
WALL
Cable
management
Cables (typical)
straps
Kickstand in down
position
1
3