CEMB USA TR–I ATEX - Manual (Page 5)

5
Notes concerning certification:
1) The employ of Atex certified transmitters is not allowed for different hazardous conditions or
anyway those exceeding the data specified on the label of the transmitter itself.
2) The transmitter does not require maintenance. Any work regarding performance checks or
repair should only be carried out in a laboratory duly authorized by CEMB SpA.
Ordering information
A B
TR – I / /
where
A : measuring range
0
0 ÷ 10 mm/s RMS
1 0 ÷ 20 mm/s RMS
2 0 ÷ 50 mm/s RMS
3 0 ÷ 100 mm/s RMS
4 0 ÷ 1 g RMS
5 0 ÷ 5 g RMS
6 0 ÷ 10 g RMS
S special to be defined
B : thread connections
0
standard ¼”18NPT
1 M8 x 1,25
Example of order
TR – I / 0 / 1
0 = measuring range 0÷10 mm/s RMS
1 = thread connection M8x1,25