CEMB USA TR-26 ATEX - Manual (Page 2)

2
Composition

Integrated transmitter body, in AISI 316L stainless steel material.
Power supply

24 Vdc (10 to 35 Vdc) current loop 4 to 20 mA (two-wires)

Maximum load as per figure 2
External connections

MIL-C-5015, 2 poles connector (conductors max section 2,5 mm²)
Environmental use field

- 50°C to + 120°C

IP 65 EN 60529/10.91 standards
Measurement type

Omnidirectional seismic (absolute vibrations)
Dynamic field

± 18 g
Transversal sensitivity

< 5 %
Linearity

± 2% - 75 Hz
Dynamic performances

±3% / 10Hz-1kHz (See figure 1)

-3db / 1.5Hz – 2.5kHz
Insulation

 10 8  between signal and container
Application axis

any
Process standard connections

M8x1,25

¼”-18NPT

¼’’-28UNF
Maintenance

none
Electrical connections

bipolar shielded cable, typical conductors section 2x1mm²
Possible prearrangements to the order

measuring field

fastening

ATEX certification type
Figure 1 – Frequency response [db]