Tv functions, Function selection, Continued) 20 – Apex Digital GT2015DV User Manual

Page 22: General operation

TV FUNCTIONS

(continued)

Function Selection

After caIIing up the Pass Code Menu first, press the CH- / + buttons to highIight “Pass Code 6688”, and then “Enter Pass

Code - - - - ”appears on the screen. Press the ChanneI Number buttons to enter new pass code which you need enter

when caIIing up the ParentaI Guide Menu.

Notes:

1 If you forget the new pass code when turning on the ParentaI Guide Menu display, you may enter the initial pass

code 6688.

2 lf you wouldn' t like to set any pass code, press the CH- / + buttons to highIight Pass “Code ControI” and MENU

button to turn off the pass code setting display.

General Operation

2.To select a channel

1.To control volume

Press the VOL -/ + buttons to decrease or increase the volume.

Volume 20

Mute

While adjusting volume, hold down the F button, then press the
VOL-/+ buttons to decrease or increase volume by 4 levels.

During normal play, press the MUTE button to eliminate the
sound until you press the VOL + or MUTE button again.

Press the CH + button to choose higher-numbered channels and
the -CH button to choose lower-numbered channels.

Using the Channel Number buttons

To select a one -digit channel number

Press the 0 button, then press another Channel Number but-
ton (except 100+) to select a desired number.
To select a two -digit channel number
Enter a first-digit, then second-digit.
To select channel number between 100 and 125 in the Cable
mode
Press the 100+ button so that

“

1_ _” appears on the screen,

then enter the next digit one and two.

Press the RECALL button and the TV will directly skip back to
the previous channel.
Note:

In the Video mode, pressing the RECALL button can return
to the TV mode.

1 Press the SCAN button so that “ Scan Off ” appear on the screen.
2 Press the SCAN button again so that “Scan On ”appear on the

screen and the TV begins to scan from the current channel.

Note:

During scanning, pressing any button can interrupt scanning.

CH +

MUTE

100+

RECAL

Scan On

124

CH -

VOL-

VOL+

SCAN