Hunter 59085 48 Fanaway - Manual (Page 17)

www.HunterFan.com
1.888.830.1326
M3531-01 • 05/14/14 • © Hunter Fan Company
17
Troubleshooting
Excessive wobbling
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
Noisy operation
• Check to see if any of the blades
are cracked. If so, replace all of the
blades.
Fan doesn’t work
• Make sure power switch is on.
• Check the circuit breaker to
ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 10.
Remote control of fan is erratic
• Make sure the battery is
installed correctly.
• Install a fresh battery.
Transmitter only works when
held at close range
• Change battery.
If you have multiple remotes or
multiple remote-controlled fans
installed on the same circuit
breaker and you are experiencing
interference or faulty operation of
your remote controls, please go to
www.HunterFan.com/FAQs
and click “How do I properly install
multiple remote-controlled fans?”
for information on how to correct
this issue.