Hunter 59085 48 Fanaway - Manual (Page 16)

www.HunterFan.com
1.888.830.1326
16
M3531-01 • 05/14/14 • © Hunter Fan Company
16
Operation, Maintenance, & Cleaning
When cleaning the fan, use
soft brushes or cloths to prevent
scratching. Cleaning products
may damage the finishes.
To install the transmitter cradle,
remove the two screws holding
your switch cover plate. Do not
remove the cover plate. Orient
the cradle by lining up the two
mounting holes with those on the
cover plate. Insert and tighten the
screws. Do not over tighten.
• Press the Fan Off button for at least
three seconds to initiate the Safe-Exit
Mode.
• The lights will flash for visual
confirmation.
• The lights will stay on 50% brightness
for 15 seconds and then begin to dim.
After a total of 30 seconds, the lights
will be completely off.
The Safe-Exit Program gives you about
thirty seconds of light when you turn
the lights off to exit the room before the
lights go out. To use Safe-Exit:
Safe-Exit
Note: For CFL lighting, the lights will stay
on 100% brightness for 30 seconds. After
a total of 30 seconds, the lights will be
completely off.
When the fan is turned on,
centrifigual force will cause the
blades to emerge from the center
of the fan, spinning. Keep the area
around the fan clear so nothing is
hit or knocked over by the blades
when they swing out. When the fan
is turned off, the blades will slowly
retract back into the center of the fan.