Operation, maintenance, & cleaning (continued), Safe-exit – Hunter 59012 52 Windspan User Manual

Page 18

www.HunterFan.com

1.888.830.1326

M3541-01 • 05/14/14 • © Hunter Fan Company

Operation, Maintenance, & Cleaning (continued)

When cleaning the fan, use soft brushes

or cloths to prevent scratching. Cleaning

products may damage the finishes.

• Press the Fan Off button for at least three

seconds to initiate the Safe-Exit Mode.

• The lights will flash for visual

confirmation.

• The lights will stay on 50% brightness for

15 seconds and then begin to dim. After
a total of 30 seconds, the lights will be
completely off.

The Safe-Exit Program gives you about thirty
seconds of light when you turn the lights off
to exit the room before the lights go out. To
use Safe-Exit:

To replace the bulbs, remove the

decorative screws while supporting the

glass bowl with one hand. Carefully

remove the glass bowl. Unscrew the

bulbs and replace them with bulbs of

the same type and wattage. Reinstall the

glass bowl assembly.

Safe-Exit