Hunter 54077 52 St. Michaels - Manual (Page 9)

www.HunterFan.com
1.888.830.1326
M3510-01 • 01/10/13 • © Hunter Fan Company
Blades
9
Lightly attach the blade irons to the
motor with screws found in
the hardware bag, then securely
tighten after both screws are attached.
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
Install the grommets, found in the hardware
bag, in the blades by hand. Place each blade
between a blade iron and medallion. Install three
blade screws, found in the hardware bag, to
attach the medallion to the blade iron. Repeat
for all blades.