Hunter 54077 52 St. Michaels - Manual (Page 8)

www.HunterFan.com
1.888.830.1326
Motor Housing
Canopy
Screw
Canopy
Screw
Place the fan housing over the motor. Align
the keyholes in the fan housing with the
two partially installed canopy screws in the
hanger bracket. Rotate the fan housing to
situate the screws in the end of the keyholes.
The motor housing is not secured until
the next step is complete. Do not leave
unattended.
Keyhole
Keyhole
Install the two remaining canopy
screws, found in the hardware bag,
into the holes in the fan housing and
into the hanger bracket. Tighten all four
screws securely.
8
M3510-01 • 01/10/13 • © Hunter Fan Company