Hunter 21585 52 Sonic - Manual (Page 15)

15
42649-01 • 01/30/14 • Hunter Fan Company
9-1. Restore power at the main electrical panel and turn on the wall
switch. The light kit should turn ON.
Note: To turn on the light without the remote, turn off the wall
switch for 5 seconds, then back on. The light kit will turn on at
maximum brightness.
9-2. Press the remote control’s HIGH speed button. The fan should
start and reach its maximum speed.
Note: For everyday operation, leave the wall switch ON. If the
remote control will not be used for 5 days or more, turn the wall
switch OFF.
9-3. Ceiling fans work best by blowing air downward
(counterclockwise blade rotation) in warm weather to cool the
room with a direct breeze. In cold weather, having the fan draw
air upward (clockwise blade rotation) will distribute the warmer
air trapped at the ceiling around the room without causing a
draft.
9-4. For cleaning finishes, use a soft brush or lint-free cloth to prevent
scratching. A vacuum cleaner brush nozzle can remove heavier
dust. Remove surface smudges or accumulated dirt and dust
using a mild detergent and a slightly dampened cloth. You may
use an artistic agent, but never abrasive cleaning agents as they
will damage the finish.
9-5. The blades on this fan have been treated with Hunter’s Dust
Armor protection, making the blades less likely to attract dust
and dirt. Use a dry or slightly damp lint free cloth to clean the
blades. Do not use a furniture polish or any other cleaners that
leave any residue, as they will damage the protective Dust Armor
on the blades.
In warm weather, use
downward air flow pattern
In cold weather, use upward
air flow pattern
To Change Airflow Direction
Turn the fan off and let it come to
a complete stop. Press the reversing
switch on the remote. Restart fan.
9 • Operating and Cleaning Your Ceiling Fan