Hunter 53014 52 Palatine - Manual (Page 8)

www.HunterFan.com
1.888.830.1326
Motor Housing
Motor Housing Screws
Align the keyholes in the motor housing with
the two partially installed motor housing
screws in the hanger bracket. Lift the motor
housing up over the motor, then rotate the
motor housing to situate the screws in the
end of the keyholes. The motor housing is
not secured until the next step is complete.
Do not leave unattended.
Keyhole
Install the two remaining motor housing
screws, found in the hardware bag,
into the holes in the fan housing and
into the hanger bracket. Tighten all four
screws securely.
Note: Fan style may vary.
8
M0090-01 • 12/18/13 • © Hunter Fan Company