Hunter 59141 52 Morelli - Manual (Page 9)

www.HunterFan.com
1.888.830.1326
9
M3552-01 • 05/14/14 • © Hunter Fan Company
Canopy
Hold the canopy up with the screw holes
aligned. Partially install two canopy
screws, found in the hardware bag, into
the holes opposite the ceiling plate hooks.
Partially install a canopy screw, found
in the hardware bag, between the
ceiling plate hooks. When all the holes
are properly aligned, securely tighten all
three canopy screws.
Screw
Holes
Canopy
Screw
Canopy
Screw
Swing the fan up to align the canopy
screw holes with the mounting holes on
the ceiling plate.
Ceiling
Plate Hooks
Note: The slots in the canopy must
remain engaged while swinging the
canopy for alignment.