Troubleshooting – Hunter 59141 52 Morelli User Manual

Page 18

www.HunterFan.com

1.888.830.1326

Troubleshooting

Lights dim when turned on or
do not turn on at all.

• Make sure the wattage of the

light bulbs installed matches
the specifications on the light
sockets.

Fan doesn’t work

• Make sure power switch is on.

• Push the motor reversing switch

firmly left or right to ensure that
it is engaged.

• Check the circuit breaker to

ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit

breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 8.

• Check the plug connection in

the switch housing.

Excessive wobbling

• Make sure the blades are

securely attached to the
blade irons according to the
blade assembly instructions
provided.

• Use the provided balancing

kit and instructions to
balance the fan.

Remote control of fan is erratic

• Make sure the battery is

installed correctly.

• Install a fresh battery.

Transmitter only works when
held at close range
• Change battery.

Noisy operation

• Check to see if any of the blades

are cracked. If so, replace all of
the blades.

If you have multiple remotes or
multiple remote-controlled fans
installed on the same circuit
breaker and you are experiencing
interference or faulty operation of
your remote controls, please go to
www.HunterFan.com/FAQs
and click “How do I properly install
multiple remote-controlled fans?”
for information on how to correct
this issue.