You’re done, Light kit (continued), See next page for remote operation instructions – Hunter 52123 52 Masterson User Manual

Page 15

www.HunterFan.com

1.888.830.1326

Light Kit (continued)

Connect the appropriate pull

chain pendant to each of the

short chains coming from the

finial and finial cap.

Press the globe and globe keeper

flush against the metal plate. Thread
the light pull chain through the hole

in the center of the finial cap and

thread the fan pull chain through the

hole in the side of the cap. Finally,

thread only the light pull chain

through the hole in the finial and

screw the finial onto the threaded rod.

Install a bulb into each of

the sockets. When necessary,

replace with bulbs of the same

type and wattage.

Finial

Cap

Light

Pull

Chain

Fan

Pull

Chain

Globe

Keeper

Metal

Plate

Globe

Note: Globe style and number of

lights may vary.

Note: In compliance with US federal energy regulations, this ceiling fan

contains a device that restricts its light output. Exceeding the wattage

limit marked on the MAX wattage sticker affixed to the light socket(s)

may result in fire hazard or improper operation.

CONGRATULATIONS!

YOU’RE DONE!

See next page for remote
operation instructions.

This manual is related to the following products: