Hunter 23855 52 Classic Original - Manual (Page 12)

Hunter Fan Company 41532-01 • 10/22/13
12
CAUTION
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE
BRACKETS WHEN INSTALLING THE BRACKETS, BALANCING THE
BLADES, OR CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS
IN BETWEEN ROTATING FAN BLADES.
! !
Fan Blade Assembly
1. Your fan may include blade grommets. If the fan has grommets, insert them by hand into the holes
on the blades (see Fig. 13).
2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the
blades may appear slightly loose after the screws are tightened. This is normal (see Fig. 14).
3. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the
fan. Insert the second blade mounting screw, then securely tighten both mounting screws.
NOTE: With some fans you have an option to install four or five blades. For five blades, mount to the
outer row of holes on the motor. For four blades, use the inner row (see Fig. 14).
Fan Blade Assembly
Blade
Mounting
Screw
Fig. 14
Blade
Grommet
Grommet
Blade
Assembly
Screws
Outer Row
Inner Row
Fig. 13