Hunter 28793 54 Teague - Manual (Page 13)

13
42479-01 • 09/27/2011• Hunter Fan Company
Installing the Glass Bowl
7-6. First install medium base bulbs.
7-7. Attach the extra pull chain (included) to the fan pull chain using
the breakaway connector. (You may find the breakaway connector
on the end of the extra chain.)
7-8. Thread the fan pull chain through the hole in the metal disk. Then,
thread the fan pull chain through the hole in the center of the
glass bowl.
7-9. Thread the light pull chain through the hole in the center of the
glass bowl.
7-10. Place the cover plate up against
the glass bowl. Align the holes
in the cover plate and glass
bowl.
7-11. Thread the fan pull chain and
light pull chain through the
appropriate holes.
7-12. Thread the light pull chain
through the finial and screw
the finial onto the threaded
rod end until tight.
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
For Light Bulbs
Metal Rod
Glass Bowl
Cover Plate
Finial
Metal Disc
Breakaway
Connector