Hunter 59035 52 Arvada - Manual (Page 7)

www.HunterFan.com
1.888.830.1326
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
To attach the upper switch housing,
partially install two switch housing
assembly screws, found in the hardware
bag, into the switch housing mounting plate.
Insert the third screw, found in
the hardware bag, into place and then
tighten all three (3) screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
Light Kit
7
M3523-01 • 05/14/14 • © Hunter Fan Company