Hunter 59035 52 Arvada - Manual (Page 19)

www.HunterFan.com
1.888.830.1326
19
M3523-01 • 05/14/14 • © Hunter Fan Company
19
Operation, Maintenance, & Cleaning (continued)
When cleaning the fan, use soft brushes
or cloths to prevent scratching. Cleaning
products may damage the finishes.
• Press the Fan Off button for at least three
seconds to initiate the Safe-Exit Mode.
• The lights will flash for visual
confirmation.
• The lights will stay on 50% brightness for
15 seconds and then begin to dim. After
a total of 30 seconds, the lights will be
completely off.
The Safe-Exit Program gives you about thirty
seconds of light when you turn the lights off
to exit the room before the lights go out. To
use Safe-Exit:
To change the bulbs, use a Phillips Head
screwdriver to remove the screws that
secure the LED light ring to the lower
switch housing. Replace with a Hunter
approved replacement LED light ring.
Reinstall the globe assembly.
Safe-Exit
Screw