Hunter 59133 96 HFC-96 - Manual (Page 14)

www.HunterFan.com
1.888.830.1326
14
M0096-01 • 07/23/14 • © Hunter Fan Company
Wrap the keyhole slots in the upper
switch housing around the screws and
twist counterclockwise.
Screw two housing assembly screws
from the hardware bag halfway into
the motor housing. It does not matter
which two screw holes you choose.
Insert the third screw, found in
the hardware bag, into place and
then tighten all three screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
Switch Housing