Hunter 18865 60 1886 Limited Edition - Manual (Page 5)

5
2 • Installing the Ceiling Plate
CAUTION: To avoid possible electrical shock, before installing your fan,
disconnect the power by turning off the circuit breakers to the outlet box
and associated wall switch location. If you cannot lock the circuit breakers
in the off position, securely fasten a prominent warning device, such as a
tag, to the service panel.
2-1. Drill one hole on each side of the supply mains using the holes
in the u-bracket as a guide. The pilot holes should be 9/64” in
diameter.
2-2. Place the bushing pin assembly into the u-bracket.
2-3. Screw the u-bracket screws through the u-bracket and into the
pilot holes.
Step 2-1
Step 2-2
Step 2-3
43113-01 • 05/04/12 Hunter® Fan Company