Hunter 18865 60 1886 Limited Edition - Manual (Page 10)

10
This fan was designed to accept any Hunter listed light kit. If you
decide to install a light kit, follow these steps to install the included
light kit adapter then follow the instructions supplied with the light kit.
7-1. Remove the two screws from the reversing switch.
7-2. Unscrew the nut on the switch housing cover. You may need to
use pliers to loosen the nut.
7-3. Remove the two screws in the switch housing cover and remove
the cover.
7-4. Install the reversing switch into the light kit adapter with the two
screws removed in step 7-1.
7-5. Thread the fan pull chain through the side of the light kit adapter
and secure with the nut removed in step 7-2.
7-6. Attach the light kit adapter to the upper switch housing with the
two screws removed in step 7-3.
7-7. Follow the instructions supplied with the accessory light kit to
complete installation of the light kit.
7 • Accessory Light Option
Step 7-1
Step 7-2
Step 7-6
Hunter® Fan Company 43113-01 • 05/04/12